Marine floating LNG vessel type
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||30 Days|
|Packaging:||bulk package and bulk vessel transportation frame container package and frame container transportation|
|Place of Origin:||china mainland(zhejiang)|
Model No.: USA-154
LNG ship is at 162 degrees Celsius (-162) special shipping liquefied gas under low temperature, is a kind of "super frozen sea car", has been hailed as the world's shipbuilding "crown jewel", currently only a handful of countries such as the United States, Japan, South Korea and the European Chinese, the shipyard can build 13. An LNG carrier is a tank ship designed for transporting liquefied natural gas (LNG). As the LNG market grows rapidly, the fleet of LNG carriers continues to experience tremendous growth.
A typical LNG carrier has four to six tanks located along the center-line of the vessel. Surrounding the tanks is a combination of ballast tanks, cofferdams and voids; in effect, this gives the vessel a double-hull type design.
Inside each tank there are typically three submerged pumps. There are two main cargo pumps which are used in cargo discharge operations and a much smaller pump which is referred to as the spray pump. The spray pump is used for either pumping out liquid LNG to be used as fuel (via a vaporizer), or for cooling down cargo tanks. It can also be used for "stripping" out the last of the cargo in discharge operations. All of these pumps are contained within what is known as the pump tower which hangs from the top of the tank and runs the entire depth of the tank. The pump tower also contains the tank gauging system and the tank filling line, all of which are located near the bottom of the tank.In membrane-type vessels there is also an empty pipe with a spring-loaded foot valve that can be opened by weight or pressure. This is the emergency pump tower. In the event both main cargo pumps fail the top can be removed from this pipe and an emergency cargo pump lowered down to the bottom of the pipe. The top is replaced on the column and then the pump is allowed to push down on the foot valve and open it. The cargo can then be pumped out.
All cargo pumps discharge into a common pipe which runs along the deck of the vessel; it branches off to either side of the vessel to the cargo manifolds, which are used for loading or discharging.
All cargo tank vapour spaces are linked via a vapour header which runs parallel to the cargo header. This also has connections to the sides of the ship next to the loading and discharging manifolds.
Q1:What is our advantage?
A1:We are specialized in providing comprehensive service as well as relevant items of dredging, land reclamation, offshore projects, marine engineering, municipal engineering, mechanical engineering, oilfield projects and environmental remediation projects
We have the whole advantaged production equipment.
We have a perfect technology system and quality control system which from initial work, to process control, to final control, forming the whole process traceability with a good command of quality and production schedule, ISO,BV certificate.
Q2:Why choose us?
A2: We have more than 10 years supplying experience for other international top contractors.Our products and service are involved in many business cases and big projects all over the world.
Advantaged equipment, technology, quality, service with good price.
Q3:How long is the delivery time?
A3:We will delivery the cargo on the premise of quality guarantee on time according to your quantity.
Q4:How about our inspection?
A4: Different products have different ways of inspection.Our inspections have follow types: Material insepction; NDT(UT,MT,RT,PT); Demension inspection;Procession inspection; Assembling inspection;Appearance inspection; Painting inspection...
We have a perfect managing system and quality control system which from initial work, to process control, to final control, forming the whole process traceability with a good command of quality and production schedule.
You can see the quality of all our previous orders were guaranteed based on our good procedure and service.
Photos of our Marine floating LNG vessel type
How to contact us?
Send your Inquiry Details in the Below, Click "Send" Now!
UniSite group was established in 2008 in Ningbo - Chinese second largest port, dredging relevant products manufacturing & supplying since 2005, that is characterized by visible leadership, vitality, innovation, long-term vision and a sound financial position.
As an international partner, we are specialized in providing comprehensive service of dredging, land reclamation, offshore projects, marine engineering, piling works, municipal engineering, mechanical engineering, construction machinery, oilfield projects and environmental remediation projects.
The group has a perfect managing system and our staff who are professional in technology are committed, passionate, efficient. Thanks to the knowledge, the experience and the skills of our work team, we are able to offer our client best possible and most sustainable solutions to their requirement. We are one of the leading steel parts and service providers for dredging and marine engineering in China.
UniSite culture consists of corporate values, corporate philosophy and behavior shaping, which is the core of responsibility and breakthrough. Based on this core, with professionalism, vitality, innovation, respect, team spirit, UniSite culture is continuously developing, along with our company from its foundation.
Activities and projects
1)UniSite`s first core activity: serve for dredging and marine projects
Provide service and relevant parts for dredgers, including dredger construction, repairing and maintenance.
Provide items for dredging, land reclamation, offshore, marine engineering, piling works, municipal engineering, oilfield projects and environmental remediation projects.
Steel Structures and Pipes
Casting and Pump parts
Machining Parts whatever big or small
Piling and Parts
- Pontoon; Floating platform; Marine work platform; Buoy; Float; Fender
- Anchor box system;
- Sinker pipe line; Shore pipe line; Floating pipe line; Piling pipe; Sheet pile;
- Y piece; Bend; Fall pipe; Ball joint pipe;
- Rubber hose;
- Small dredger: standard cutter suction, bucket, grab, shovel stone, mud and stone construction
- Spud; CSD Spud;
- Suction pipe; Arm piece; Jet pipe;
- DW pipe; Wear resistant pipe; Structure pipe; Shipping building pipe;
- Pump; Pump spare parts(impeller, shell, casing, liner, cover)
- Branch casting pipe; Casting bend;
- Loading box; Bottom door; Overflow; Fender frame; Bow coupling; Anchor; Hopper panel; Basket; Bucket; Clamp ring; Drag head; Cutter head; Cutter ladder;
- Sliding piece; Gantry; Turning gland; Chute flap; Kingpin; Cutter platform; Water box; Bow coupling; Anchor; Hopper panel; Hopper door; Basket; Bucket; Bucket wheel; Clamp ring; Close plate; Gantry;Dredge gate valve; Valve body;
- Mooring system(mooring rope, mooring bollard, mooring winch, mooring fairlead, anchor windlass, chain stopper, roller fairlead, wheel fairleader, panama chock, marine mooring rope reel, anchor releaser, marine shutter, pipe clamp)
2) UniSite`s second core activity: serve for machinery and automobile projects
Provide service and relevant parts for mechanical engineering, construction machinery, agricultural machinery, port hoisting machinery, metallurgy, automobile, chemical, marine machinery.
Big Machining(machining center, boring and milling, lathe)
Small Machining(cnc, milling, grinding)
Casting (sand, investment)
Stamping and Bending
- Machinery Products(like Wind Turbine Generate System Hub, Wind Power Bearing Block, Punching Machine Sliding Block, Punching Machine, diesel power generator base, die casting machine base, injection molding machine base, punch, tank, pump parts, accumulators parts, valve parts, construction parts, agricultural parts etc.)
- Machinery Products
- Auto Products
- Shipping building Products
- Medical Products
- Oil Products
With about 10 years` experience, now our products and service are involved in many projects all over the world. Like:
1)Palm islands construction, World thousand islands construction, Australian coastline and port expansion, Gladstone project construction, Brisbane airport project construction, the Vietnamese government`s port expansion, Panama coastline expansion, Railway tunnel Schuman-Josaphat construction(Belgium), World`s first formal floating sea restaurant construction(Darling Harbour, Sydney), New Suez Canal project construction, Municipal tunnel projects construction(Alger)--
Production and equipment
pipeline production equipment
bending press equipment
CNC plasma cutting equipment
advanced paint room and equipment
Technology and Quality
Offering our client best possible and most sustainable solutions to their requirement. Production procedure
Step1: Drawing and technical requirement analysis, production lofting;
Step2: Material cutting, trimming, groove, cleaning, bending, rolling, dimension & NDT inspection
Step3: From part assemble to whole assemble with accurate template and platform, dimension & NDT inspection, welding, dimension & NDT inspection;
Step4: Casting, forging, stamping, machining if necessary
Step5: Final dimension & NDT inspection;
Step6: Surface treatment;
Step7: Package, Loading and Lashing when delivery;
UniSite have a perfect managing system and quality control system which from initial work.
ISO9001-2008/CCS; BV manufacturer capability qualification.
Taken part in the CHINA DREDGING ASSOCIATION
Quality, health, safety and environment (QHSE)
In-house safety training to our staff
Checking all the production equipment periodically
Preventing pollution, accidents and health hazards, auditing
In order to perform comprehensive service and relevant items to clients' satisfaction, UniSite knows the importance of advanced technology, equipment, quality and continuously invests in advanced production base and equipments. The group has a perfect managing system and quality control system which from initial work, to process control, to final control, forming the whole process traceability with a good command of quality and production schedule.
We are able to offer our client best possible and most sustainable solutions to their requirement.
- Company Name: Unisite Group Ltd.
- Representative: Yu ZHUOFANG
- Product/Service: Dredging Parts , Marine Engineering And Parts , Ship Building And Parts , Machining Parts , Casting And Pump Spare Parts , Piling Parts
- Capital (Million US $): 1,500,000
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 6
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: JiaoTou industry park, LiuHeng island, Putuo district, Zhoshan
- Contact Person: Mr. Kevin Mei
- Tel: 86-574-87053650
Premium Related Products